The injection molding machine manipulator is an automated production equipment that can simulate some functions of the upper limbs of the human body and can be automatically controlled to transport the products or operate the tools according to the predetermined requirements. At present, Chinese plastics processing factories in the coastal areas of South China and East China have shown more and more interest in robots, but the penetration rate of injection molding machine manipulators in the domestic plastic machine industry is less than 10%. The robot can ensure consistency in the operating cycle, improve quality and be safer. With the rapid development of the plastics processing industry in China, the degree of automation of injection molding equipment is also increasing. Modern injection molding machines are often equipped with robots to increase production efficiency. According to the "2012-2016 China Robot Industry Investment Analysis and In-depth Research Advisory Report" released by China Industry Research Network, in recent years, the number of export and import injection molding machines in China has remained basically the same, both of which are about 15,000 units, but the import value. It is $920 million and exports are $350 million. At present, precision injection molding machines are mainly foreign brands. Biaxially stretched PET (PA, BOPP) film units and precision medical catheter extrusion units in extrusion equipment have also been the domain of foreign companies. It is necessary to develop domestically produced precision injection molding and extrusion equipment with independent intellectual property rights. On the one hand, it can replace imports, and it can also make China occupy a place in the high-end market of international plastic machinery. Traditional plastic machinery also has certain potential in terms of energy saving, because the previous designs often only focus on the production capacity of a single machine. In the design of energy-saving plastic machinery, production speed is not the most important indicator, the most important indicator is the energy consumption of processing unit weight products. Therefore, the mechanical structure, control mode, and operating process conditions of the equipment must be optimized based on minimum energy consumption.
China's plastic machinery products quality rate of 90%. China's famous brand products are all up to standard. In order to safeguard the legitimate rights and interests of consumers and promote the healthy development of the plastic machinery industry, the General Administration of Quality Supervision, Inspection and Quarantine of China organized a national supervision and spot check on the quality of plastic machinery products. A total of 30 products (excluding export products) produced by 30 enterprises in Shanghai, Zhejiang, Jiangsu, Guangdong, Fujian, Shandong and other six provinces and municipalities directly under the Central Government were sampled. The sampling rate of physical product quality was 90%.
Continuous state supervision and spot checks have promoted the improvement of the company's quality awareness. In this spot check, there are 26 projects with a single item compliance rate of 100%; four kinds of national inspection-free, Chinese brand-name products, all the inspection items meet the requirements of national standards.
Robot market analysis
The Chinese automation market is an attractive market, and intelligent fully automated machinery is a blank.
Investment analysis of manipulator product growth
According to market research, with the development of China's plastics industry, the annual growth rate of China's plastic machinery industry in recent years is about 30%, and the growth rate of profit margin is much higher than the increase of total industrial output value. It is the fastest growing industry in China's machinery industry. one. At present, China's plastic processing machinery can meet the basic needs of the country, but compared with the world's advanced level, China's plastic processing machinery still has a long way to go in terms of quality stability, product accuracy and automation level.
According to the market survey of the status quo of China's plastic processing machinery: as an important technical equipment, plastic processing machinery is widely used in the building materials industry, packaging industry, electrical and electronic information industry, agriculture, automotive and transportation, light industry, petrochemical industry, machinery industry, The various sectors of the citizen economy, such as the defense industry, and the various areas of people’s lives have increasingly shown an extremely important role in the citizen economy.
The injection molding machine is the largest variety of plastic machines in China with the largest production and utilization, and is also the main exporter of plastic presses in China. In the late 1950s, China produced the first injection molding machine. However, due to the low technical content of the equipment at that time, only general-purpose plastics could be used to produce daily necessities with lower technical requirements, such as plastic boxes, plastic drums, and plastics. Pots and so on.
China's plastic machinery products quality rate of 90%. China's famous brand products are all up to standard. In order to safeguard the legitimate rights and interests of consumers and promote the healthy development of the plastic machinery industry, the General Administration of Quality Supervision, Inspection and Quarantine of China organized a national supervision and spot check on the quality of plastic machinery products. A total of 30 products (excluding export products) produced by 30 enterprises in Shanghai, Zhejiang, Jiangsu, Guangdong, Fujian, Shandong and other six provinces and municipalities directly under the Central Government were sampled. The sampling rate of physical product quality was 90%.
Continuous state supervision and spot checks have promoted the improvement of the company's quality awareness. In this spot check, there are 26 projects with a single item compliance rate of 100%; four kinds of national inspection-free, Chinese brand-name products, all the inspection items meet the requirements of national standards.
Robot market analysis
The Chinese automation market is an attractive market, and intelligent fully automated machinery is a blank.
Investment analysis of manipulator product growth
According to market research, with the development of China's plastics industry, the annual growth rate of China's plastic machinery industry in recent years is about 30%, and the growth rate of profit margin is much higher than the increase of total industrial output value. It is the fastest growing industry in China's machinery industry. one. At present, China's plastic processing machinery can meet the basic needs of the country, but compared with the world's advanced level, China's plastic processing machinery still has a long way to go in terms of quality stability, product accuracy and automation level.
According to the market survey of the status quo of China's plastic processing machinery: as an important technical equipment, plastic processing machinery is widely used in the building materials industry, packaging industry, electrical and electronic information industry, agriculture, automotive and transportation, light industry, petrochemical industry, machinery industry, The various sectors of the citizen economy, such as the defense industry, and the various areas of people’s lives have increasingly shown an extremely important role in the citizen economy.
The injection molding machine is the largest variety of plastic machines in China with the largest production and utilization, and is also the main exporter of plastic presses in China. In the late 1950s, China produced the first injection molding machine. However, due to the low technical content of the equipment at that time, only general-purpose plastics could be used to produce daily necessities with lower technical requirements, such as plastic boxes, plastic drums, and plastics. Pots and so on.
