What I want to share today is about some common sense that the robot should pay attention to when working. Taiyang Automation reminds everyone that when using a robot, it must be operated in accordance with the operating instructions and operating requirements of the robot.

1. Before operating the loading and unloading, be sure to check whether there is water or oil in the electrical control box. If the appliance is damp, do not turn it on, and check if the power supply voltage is consistent, and whether the front and rear safety door switches are normal.

2. Verify that the direction of rotation of the motor is the same, then turn on the power.

3. When the industrial robot needs to be dismantled, turn off the power of the injection machine, turn off the power of the robot, and turn off the air pressure source of the robot.

4. Discharge air pressure. Loosen the cylinder fixing plate fixing screw and move the arm to move the bumper seat close to the arm.

5. Tighten the cylinder fixing plate so that the arm cannot move. Lock the rotating safety screw so that the robot cannot rotate.